Sunray steel bezel inserts (SKX and 42mm SRPD-Sports)

 20,00

Clear

Description

These FLAT bezel inserts can be used to replace your current bezel insert, or you can put it in a replacement bezel like the coin edge bezel (and keep your original bezel complete). The ebzel inserts are made of steel and have a unique sun-ray brush finish, which makes the light play with the shine.

The bezel inserts are provided with a cirkel-shaped double-sided tape from 3M, which can be used to attach the bezel insert in the bezel.

Installation: put the double sided tape on the bezel, leave the top paper on. Then press the bezel back on the watch. remove the top paper from the tape and place the insert. This way you can also take care of aliging the bezel insert to the 12.

Easy way to stick the adhesive on the bezel insert (pictures here):

  1. Put your finger through the bezel insert.
  2. Attach the complete circle on the top of your finger
  3. Pull your finger “through” the bezel insert, make sure the bezel insert attaches to the circle correctly
  4. Press the circles firmly on the bezel insert and press out the middle part.

 

Bezel insert dimensions: inner width = 3,15 cm and outer width = 3,8cm
made for SKX007/009 (7S26-0020) and 42mm Seiko Sports (4R36-07G0).

If you want the bezel-insert to be installed in an ordered watch, please select this operation in Operations.