Description
| NOT produced by Seiko but by Miltat, you can also buy them at strapcode.com en taikonaut-time.com |
|
FINALLY !! This is a Beads of Rice type of bracelet, all solid! The links are attached to eachother with small screws, a small screwdriver 1.4mm, is what you need to remove a screw. I usually secure those screws with a bit of Loctite 222/243, Bison Lock bond or even a bit of chewing gum on the thread. |
|
It needs a clasp of 18mm wide. It tapers from 22mm at the lugs to 18mm at the clasp. This bracelet has been made for the Seiko SKX0xx, with 22mm lugs (7S26-0020, 7S26-0028, 7S26-7020, 7S26-02K0). The end pieces (solid steel) do not fit on a different watch case (the offset of the push pin holes makes that it does not fit the Seiko Sports with SKX-shaped case and 4R36 movement). It comes with push pins with shoulders so they can be removed with ease. |
| Tip for installation: Go through the lugs with the end pieces without push pins. This removes possible steel particles around the holes for the push pins. |
You can choose between a few types of clasp:
- Neutral with 3 adjustment holes
- Neutral with 6 adjustment holes
- V-clasp with 6 adjustment holes
- Seiko clasp with 4 adjustment holes
- Seiko clasp with 4 adjustment holes and open or closed divers’ extension
- Ratcheting, no adjustment holes, but extendable
- Solid Ratcheting, with one adjustment hole and up to 1.8cm extra length
