Description
| Only order these combined with SKX013 purchase, they have reduced prices!! When ordered without a watch that it is supposed for, the order will be cancelled. |
These solid steel bracelets are of high quality and are made by Taikonaut time (so not by Seiko). The standard clasp is a sturdy clasp with 3 adjustment holes. It locks with a double-lock system, like most Seiko clasps do.There are some options to change the clasp: a Seiko diver clasp but also clasps with more adjustment holes or a ratcheting systeme to make the bracelet a little bit longer. The links of the bracelets are screwed, a 1.4mm screwdriver will work; use some loc-tite to secure the screws.
The end pieces are made of solid steel, so they can only be used for the Seiko SKX013 case.
When you use a rubber strap or a nato, use the OEM fat push pin from Seiko.
When you use a rubber strap or a nato, use the OEM fat push pin from Seiko.
- Solid Oyster, with 18 or 20mm clasp, so one tapers from 22mm to 20mm, and the other from 22 to 18mm.
- Solid Presidential, with 18mm clasp. Here the middle piece also comes out of the end piece. Almost the same as the Seiko Presidential that was mounted on the SKXA53.
The bracelets are “hanging” on the middle part of the end-link, so the lug-to-lug distance will be about 8mm more.
| Installation tip: Remove the push pins and swipe the end pice a few times between the lugs. This will remove steel from the side if the drilled lug holes, and the push pins go in easier. |
| Clasps | |
 |
 |
Various clasps are available, from left to right:
1. Neutral 3 with 3 adjustment holes
2. V-clasp with 6 adjustment holes (closest to the original Jubilee clasp)
3 Seiko with 4 adjustment holes (Not available anymore in 18mm, so not for these bracelets)
4 Seiko with 4 adjustment holes and divers extension
5 Ratcheting, extendable
