Sloped ceramic bezel inserts for SKX

35,0040,00

Clear

Description

These SLOPED bezel inserts can be used to replace your current bezel insert, or you can put it in a replacement bezel like the coin edge bezel (and keep your original bezel as spare). They are made of ceramic material, so very hard to scratch.

The shape is “sloped”: they go up towards the middle, to avoid a gap between glass and bezel insert, combined these with the special “stepped” sapphire.

The bezel inserts are provided with a cirkel-shaped double-sided tape from 3M, which can be used to attach the bezel insert in the bezel.

Installation: put the double sided tape on the bezel, leave the top paper on. Then press the bezel back on the watch. remove the top paper from the tape and place the insert. Especially with the ceramic and the sapphire bezel inserts you cannot press on the bezel when the insert is installed: those will break. The alignment of the bezel is also ensured when you do it like this.

 

If you want the bezel-insert to be installed in an ordered watch, please select this operation in Operations.

Bezel insert dimensions:
inner width = 3,05 cm and outer width = 3,8cm