Asteroid for SRPE-Sports (40mm SKX-case, 20mm lugs)

 85,00 112,50

Category: Tags: ,

Description

NOT produced by Seiko but by Miltat, you can also buy them at strapcode.com en taikonaut-time.com
If you look at this bracelet, it looks like a combination of the solid Jubilee and the Engineer-2.

This solid (316L) steel bracelet has solid end pieces and solid middle parts. It looks a lot like the Jubilee, but when you look closer you see some differences. The side parts of the links are made like the Engineer-2 parts, and instead of 3 rows, there are 5 rows inside the bracelet. Those are more or less rectangular, The bracelet is attached to the end piece by three parts that stick out of the end piece, so the lug-to-lug width is in fact a bit wider. The links are attached to each other with small screws, a small screwdriver (1.4mm), is what you need to remove a screw. There are many clasp-options, even a Seiko clasp with 4 adjustment holes and a divers’ extension.

Solid Jubilee
This bracelet tapers from 20mm at the lugs to 18mm at the clasp. This bracelet has been made for the Small SRPE-Sports watch case (case code 4R36-08L0), the end pieces (solid steel) do not fit on a different watch case. It comes with thick push pins, with shoulders so they can be removed with ease, and the lugs of the watch have been drilled through too.
Tip for installation:
Go through the lugs with the end pieces without push pins.
This removes possible steel particles around the holes for the push pins.
Solide Jubilee Solide Jubilee

 

Clasps I have:
1. Neutral with 3 adjustment holes
2. V-clasp, with 6 adjustment holes (comes the nearest to the Seiko clasp on the Seiko Jubilee)
3. Seiko with 4 adjustment holes
4. Seiko with 4 adjustment holes and a divers’ extension
5. A very solid, Ratcheting clasp
6. The Seiko ratcheting clasp